Firmware
0.9.0
Toggle main menu visibility
Loading...
Searching...
No Matches
Changelog
0.9.0
Improve DCC generation for locos (
#29
)
Add access point mode (
#179
)
0.8.1
Add ᴡʟᴀɴMAUS export (
#164
)
0.8.0
Add VCC voltage measurements and hardware revision detection (
#141
)
Add Z21
LAN_X_SET_LOCO_NAME
(
#164
)
Bugfix DCC service mode byte only verify never checks for value 255 (
#145
)
Bugfix DCC BiDi channel 1 collision invalidates entire datagram (
#153
)
Bugfix RMT memory corruption (
#160
)
0.7.1
Add (supported) Z21 settings (
#138
)
Bugfix disable track output when restarting (
#134
)
Bugfix settings reset must always work (
#135
)
Bugfix Z21
LAN_X_SET_STOP
and
LAN_X_SET_LOCO_E_STOP
(
#136
)
0.7.0
Add Ethernet support through
W5500
(
#123
)
Add display support (
#116
)
Bugfix interleave DCC packet addresses (
#38
)
Bugfix don't execute
LAN_X_SET_TRACK_POWER_ON
during service mode (also don't reply with
LAN_X_BC_TRACK_POWER_ON
) (
#125
)
Bugfix Z21 system state subscriptions not handled (
#128
)
Bugfix livelock issue in DCC scheduling algorithm (
#129
)
Bugfix missing lock guards in DCC service (
#130
)
Bugfix potential infinite recursion in DCC service (
#131
)
0.6.1
Add
Z21 ᴡʟᴀɴMAUS
support (
#115
)
Bugfix restore DCC operations- after service mode provided it was previously enabled (
#113
)
0.6.0
Add timeout to
drv::out::track::dcc
task (
#107
)
Drop
ULF_DECUP_EIN
support (
#105
)
Enable ZIMO MX decoder updates and uploads again (
#105
)
Bugfix unknown BiDi ID causes out of bounds access (
#110
)
0.5.2
Add DNS server in AP mode (
#100
)
Add CSS to captive portal (
#103
)
Disable ZIMO MX decoder updates and uploads (
#105
)
0.5.1
Increase ADC sample rate to 80kHz
Bugfix service mode packets are interleaved (
#97
)
Bugfix increase minimum number of service mode programming packets to 5
0.5.0
Add support for basic accessory decoders
Add
/dcc/turnouts/
endpoint
Add
dcc_accy_swtime
setting
Add
dcc_accy_pc
setting
0.4.1
Add
/dcc/
endpoint (
#84
)
Implement
z21::server::intf::System::systemState
(
#90
)
Bugfix task names inside
intf::usb::any_service_task_active
(
#86
)
Bugfix
intf::http::Endpoints
key comparison uses prefix-based matching (
#87
)
0.4.0
Add
http_exit_msg
setting (
#83
)
Workaround for Windows 11 USB issues (
#83
)
0.3.3
Bugfix POM read with CV value 0 (
#81
)
0.3.2
Bugfix some MX decoders require 2nd stop bit during DECUP update (
#68
)
0.3.1
Bugfix POM (
#67
)
Bugfix don't add DCC address 0 to locos (
#71
)
0.3.0
Bugfix short circuit detection does not trigger (
#63
)
0.2.1
Add RailCom data to Loco JSON (
#53
)
Bugfix MN180N18 (bootloader 2.10.8) update not working (
ulTaskNotifyTakeIndexed
without time to wait not reliable) (
#52
)
Bugfix turn on bug LED during DCC service mode (
#54
)
Bugfix BiDi datagram containing ACK discarded (
#58
)
0.2.0
Support static IP (
#49
)
0.1.0
Remove current limit during updates setting (
#46
)
0.0.9
Update to Frontend
0.0.9
LED duty cycle settings (
#42
)
Current limit during updates setting (
#46
)
Bugfixes WebSocket (
#45
)
Send messages on
WIFI_TASK_CORE_ID
using
httpd_queue_work
Set
CONFIG_HTTPD_QUEUE_WORK_BLOCKING=y
because otherwise work in the queue got lost
Set
CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=64
to allow for bigger batch sizes when receiving WebSocket messages
Set
CONFIG_LWIP_TCP_RECVMBOX_SIZE=64
(see above)
Set
CONFIG_LWIP_UDP_RECVMBOX_SIZE=64
(see above)
0.0.8
Bugfix WebSocket frame parsing errors (
#9
)
Bugfix mDNS does not support subdomains (
#39
)
0.0.7
Add short loco addresses and repeat higher functions DCC flags (
#29
)
Add
_z21
mDNS service (
#32
)
Bugfix wrong loco address in NVS when changing address (
#31
)
Bugfix increase brown-out level to 2.98V (
#30
)
0.0.6
Update to Frontend
0.0.7
Add RSSI to
/sys/
GET request (
#27
)
0.0.5
Update to Frontend
0.0.6
Add
LAN_X_SET_LOCO_FUNCTION_GROUP
Allow changing loco address (
#25
)
0.0.4
Update to Frontend
0.0.3
Add alternative SSID/password (
#16
)
Bugfix DECUP_EIN timeout locks firmware in
Suspend
state (
#21
)
0.0.3
Update to Frontend
0.0.2
0.0.2
Bugfix ZCS does not establish a Z21 protocol connection (
#17
)
0.0.1
Bugfix MX decoders don't support ZUSI exit (
#11
)
0.0.0
Test release for
Flasher
Firmware 0.9.0
Firmware 0.9.0